Description
Designing or repairing a high-efficiency switch-mode power supply (SMPS), modified-sine-wave UPS inverter, or high-current buck/boost DC-DC converter requires a proven pulse-width modulation controller capable of regulating both output voltage and peak switching current simultaneously. The TL494 SMD IC available at Rafiq Electronics is an industry-standard fixed-frequency PWM control circuit packaged in a compact SOIC-16 surface-mount housing, integrating every essential building block needed for closed-loop power conversion on a single silicon die. Inside this TL494 SMD IC, engineers get an on-chip 5V precision voltage reference (±5% accuracy), a programmable sawtooth oscillator spanning 1kHz to 300kHz, two uncommitted error amplifiers for simultaneous voltage and current feedback loops, an adjustable dead-time control comparator, and dual uncommitted output transistors configurable for either single-ended or push-pull switching topologies. To explore how pulse-width modulation varies duty cycle to regulate switch-mode power stages efficiently, you can read about Pulse-width modulation power control on Wikipedia.
Unlike basic single-loop PWM drivers that lack built-in overcurrent limiting or dead-time protection, the TL494 SMD IC prevents catastrophic transformer saturation and cross-conduction shoot-through in half-bridge and push-pull inverter stages. By biasing the Output Control pin (Pin 13) to GND for parallel single-ended operation or tying it to the internal VREF (Pin 14) for alternating push-pull drive, one chip adapts seamlessly across ATX computer power supplies, 12V/24V solar inverters, and variable bench power supplies. An internal flip-flop routes alternating PWM pulses cleanly between Output 1 and Output 2 in push-pull mode, while the dedicated Dead-Time Control (Pin 4) guarantees a minimum ~5% off-time gap between switching transitions.
Inverter repair technicians, SMPS service engineers, and power electronics hobbyists keep the TL494 SMD IC stocked on their benches because it serves as the heartbeat controller in countless commercial battery chargers, LED drivers, and automotive amplifiers. Operating across a wide 7V to 40V DC supply range with up to 200mA sink/source output drive current per channel, it directly drives gate-drive transformers or emitter-follower totem-pole transistor buffers for heavy power MOSFET banks.
Whether you are replacing a blown PWM controller on a dead ATX/SMPS board or prototyping a custom high-power DC-DC converter, this TL494 SMD IC delivers rock-solid frequency stability and dependable closed-loop regulation.
Key Features & Power Control Advantages
-
Complete PWM Control Architecture on One Chip: Integrates a 5V reference regulator, adjustable oscillator, dual error amplifiers, dead-time comparator, and dual output drivers.
-
Selectable Push-Pull or Single-Ended Output (
Pin 13): Easily switch between alternating push-pull inverter drive and parallel single-ended buck/boost operation. -
Wide 7V to 40V DC Supply Range: Operates directly from 12V and 24V battery rails without requiring an external low-voltage pre-regulator.
-
Programmable 1kHz to 300kHz Switching Frequency: Set exact operating frequency cleanly using a single external timing resistor ($R_T$ on Pin 6) and timing capacitor ($C_T$ on Pin 5).
-
Dual Error Amplifiers for Voltage & Current Limiting: Enables simultaneous constant-voltage (CV) regulation and constant-current (CC) short-circuit protection—ideal for battery chargers.
-
Compact SOIC-16 Surface-Mount Package: Space-saving 16-pin SMD gull-wing footprint suitable for dense power supply PCBs and hot-air rework.
Technical Specifications
| Parameter | Symbol | Rating / Details |
| Product Name | — | TL494 SMD IC |
| IC Function | — | Fixed-Frequency Pulse-Width Modulation (PWM) Control Circuit |
| Package Type | — | SOIC-16 (16-Pin Surface-Mount SMD) |
| Recommended Supply Voltage | $V_{CC}$ | 7.0V to 40.0V DC |
| Internal Reference Output | $V_{REF}$ | 5.0V ± 5% (Up to 10mA Load Capability) |
| Oscillator Frequency Range | $f_{OSC}$ | 1kHz to 300kHz (Set via External $R_T$ & $C_T$) |
| Output Collector Current (Each) | $I_C$ | 200mA Max Continuous (250mA Peak) |
| Output Configuration | — | Dual Uncommitted NPN Transistors (Single-Ended or Push-Pull) |
| Minimum Dead Time | — | ~5% Built-In (Adjustable up to 100% via Pin 4) |
| Standby Supply Current | $I_{CC}$ | ~7.5mA Typical (at $V_{CC} = 15\text{V}$) |
| Operating Temperature Range | $T_A$ | 0°C to +70°C (Commercial) / -40°C to +85°C (Industrial Grade) |
Practical Power Electronics & Repair Applications
-
12V/24V UPS & Solar Inverter Gate Drive Stages: Drive push-pull N-channel MOSFET power banks such as our IRFZ44N N-Channel MOSFET Transistor via totem-pole buffers in inverter boards.
-
SMPS, ATX Power Supply & Battery Charger Repairs: Direct replacement PWM controller IC for faulty computer power supplies, lithium battery chargers, and LED driver modules.
-
Custom CV/CC Buck & Boost DC-DC Converters: Utilize the two onboard error amplifiers to build regulated adjustable bench power supplies and lithium pack chargers.
-
Precision SMD Soldering & Rework: Install onto 1.27mm-pitch SOIC-16 pads cleanly using fine-tip soldering tools like our Goot 60W Soldering Iron.
Circuit Design & Rework Precautions
When replacing a failed TL494 SMD IC on an SMPS or inverter board, always check the gate-drive buffer transistors (such as complementary NPN/PNP totem-pole pairs) and gate resistors before powering up the new IC—shorted primary MOSFETs frequently send high-voltage spikes back through the driver stage and can immediately damage a newly soldered controller. Place a 100nF ceramic bypass capacitor directly across Pin 12 ($V_{CC}$) and Pin 7 (GND) to prevent oscillator jitter, and never exceed the 10mA load limit on the internal 5V reference (Pin 14).









Reviews
There are no reviews yet.