Welcome to Rafiq Electronics
Free shipping on Order Over Rs. 3000
15 DAYS RETURN & EXCHANGE POLICY
GET 4% DISCOUNT ON ADVANCE PAYMENT
Previous
Previous Product Image

63V 100uf Capacitor – High-Quality Power Supply & DIY Electronics Component

Rs. 15 – Rs. 99Price range: Rs. 15 through Rs. 99
Next

50K Variable Potentiometer (503) – Adjustable Resistor for Arduino, DIY, and Audio Projects

Rs. 49 – Rs. 89Price range: Rs. 49 through Rs. 89
Next Product Image

1K Variable Potentiometer (102) – Preset Trimpot Adjustable Resistor (1K Ohm)

Price range: Rs. 49 through Rs. 89

Fine-tune low-impedance voltage dividers, sensor bridges, and analog feedback loops with the 1K Variable Potentiometer (102) from Rafiq Electronics. This compact 1K Ohm preset trimpot resistor features a 3-pin PCB/breadboard footprint for Arduino, calibration, and DIY electronics.

Buy Now
Trust Badge Image

Description

Dialing in high-precision low-impedance voltage dividers, adjusting operational amplifier gain ratios, and setting fine current-sensing thresholds in microcontroller and power circuits require a low-value variable resistor that offers smooth, granular wiper control without jumpy voltage swings. At Rafiq Electronics, we supply the 1K Variable Potentiometer (102), a compact single-turn preset trimpot resistor stamped with the standard 3-digit EIA resistance code “102” ($10 \times 10^2\,\Omega = 1,000\,\Omega = 1\text{k}\Omega$). Engineered for direct PCB and breadboard mounting, this adjustable trimmer allows technicians, embedded developers, and DIY makers to set exact resistance values anywhere between $0\,\Omega$ and $1,000\,\Omega$ using a small flathead or cross-slot screwdriver—delivering far tighter calibration resolution in low-resistance circuits than higher-value 10K or 50K potentiometers. To learn more about resistive voltage dividers and variable potentiometer behavior, you can read about Potentiometer operating principles on Wikipedia.

In low-impedance analog circuits—such as 5V/3.3V sensor bridge balancing, Wheatstone strain-gauge zeroing, LCD backlight/contrast bias networks, and precision regulator feedback loops—a 1K Variable Potentiometer (102) prevents loading errors and thermal noise that plague high-resistance trimmers. Its stable carbon-film resistive track and spring-tensioned metal wiper maintain consistent contact resistance even inside enclosures exposed to mild bench vibration. Whether configured as a 3-terminal ratiometric voltage divider or a 2-terminal variable rheostat (by tying the wiper to one end pin), this $1\text{k}\Omega$ trimmer provides linear, predictable resistance adjustment across its full rotation arc.

Electronics repair engineers and Arduino/ESP32 hobbyists rely on the 1K Variable Potentiometer (102) for fine-tuning feedback loops in custom DC-DC converters, calibrating analog voltmeter/ammeter shunt amplifiers, and setting accurate bias currents in discrete transistor stages. Its three rigid tinned leads drop cleanly into standard 2.54mm (0.1-inch) perfboards, solderless breadboards, and custom PCBs without requiring mounting nuts or bulky panel hardware.

Keeping the 1K Variable Potentiometer (102) stocked in your component organizer ensures you always have a fine-resolution $1\text{k}\Omega$ calibration trimmer ready for precision analog tuning, power supply repairs, and microcontroller sensor interfaces.

🌟 Key Highlights

  • 🎯 High-Resolution 1K Ohm (Code 102) Range: Provides ultra-fine, smooth calibration control in low-impedance feedback dividers, sensor bridges, and bias circuits.

  • 🔧 Easy Screwdriver Calibration Rotor: Precision adjustment slot holds your calibration setting firmly after tuning with a small flathead or Phillips driver.

  • 🔄 Dual Divider & Rheostat Wiring: Works seamlessly as a 3-pin ratiometric voltage divider or a 2-pin variable series resistor ($0\,\Omega$ to $1,000\,\Omega$).

  • 🔌 Standard 2.54mm Breadboard & PCB Pitch: Rigid tinned leads fit directly into solderless breadboards, dot-matrix perfboards, and through-hole PCBs.

  • 📈 Linear Taper (B-Type) Characteristic: Delivers proportional resistance change across the full adjustment angle for predictable circuit tuning.

  • 🛠️ Compact & Space-Saving Footprint: Low-profile trimmer form factor fits easily inside crowded power supplies, battery chargers, and handheld enclosures.

📋 Technical Specifications

Specification Details
Product Name 1K Variable Potentiometer (102)
Component Type Single-Turn Preset Trimpot / Variable Resistor
Resistance Value & Marking Code 1K Ohm (1,000Ω) — EIA Code 102
Resistance Tolerance ±20%
Taper Characteristic Linear (B-Taper)
Rated Power Dissipation ~0.1W to 0.2W (100mW–200mW)
Max Operating Voltage 50V DC
Pin Configuration 3-Pin Through-Hole (2 Fixed Track Ends + 1 Center Wiper)
Lead Pitch Standard 2.54mm (0.1 Inch) Compatible
Operating Temperature Range -25°C to +70°C (or +85°C)

🔌 Applications

  1. Precision Shunt Regulator & Feedback Calibration: Fine-tune reference divider networks paired with precision ICs like our TL431 Adjustable Precision Shunt Regulator or compact trimmer setups alongside our 3K Variable Potentiometer (302).

  2. Transistor Bias & Current-Limit Trimming: Set exact base-emitter bias ratios and thermal compensation thresholds for amplifier stages using our BD139 Transistor and BD140 Transistor.

  3. Arduino & Microcontroller Analog Reference Tuning: Calibrate 0–5V ADC sensor spans, op-amp zero-offset nulling, and comparator trigger thresholds.

  4. LED Brightness & Low-Current Signal Attenuation: Adjust indicator LED intensity and low-level audio/signal attenuation on prototype breadboards.

💡 Best Installation & Safety Tips

Never connect a 1K Variable Potentiometer (102) directly across a 5V or 12V power rail in rheostat mode without a fixed series current-limiting resistor—if the wiper is rotated near $0\,\Omega$, even a 5V supply will drive excessive current through the narrow remaining carbon track segment and burn it out ($P = V^2 / R$). Always adjust the rotor gently within its mechanical stops using a small precision screwdriver.

Additional information

SELECT QUANTITY

5 Pcs, 10 Pcs

Reviews

There are no reviews yet.

Be the first to review “1K Variable Potentiometer (102) – Preset Trimpot Adjustable Resistor (1K Ohm)”

Your email address will not be published. Required fields are marked *

Recently Viewed Products

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping