Description
Amplifying millivolt current-shunt drops, conditioning thermistor temperature sensors, or repairing battery charger constant-current feedback loops on single-rail DC boards becomes unnecessarily complex when using legacy op-amps that require dual positive-and-negative power supplies. The LM358 SMD IC available at Rafiq Electronics integrates two independent, internally frequency-compensated high-gain operational amplifiers inside a space-saving SOIC-8 surface-mount package, engineered specifically to operate cleanly from a single 3V to 32V DC power supply (or split ±1.5V to ±16V rails). Because its input common-mode voltage range extends all the way down to the negative supply rail (GND), this LM358 SMD IC senses ground-referenced low-side current shunts and zero-volt sensor signals directly without external level-shifting stages. To explore how negative feedback configures operational amplifiers into precision voltage followers, non-inverting amplifiers, and active comparators, you can read about Operational amplifier circuits on Wikipedia.
Drawing a remarkably low quiescent supply current of roughly 500µA to 700µA across both amplifier channelsāvirtually independent of supply voltageāthe LM358 SMD IC preserves battery runtime in portable lithium-ion testers, solar charge controllers, and handheld diagnostic instruments. Its internal unity-gain frequency compensation eliminates the need for external phase-compensation capacitors, keeping PCB layouts clean and stable across voltage follower buffers, Sallen-Key active filters, and difference amplifiers. Standard SOIC-8 pinout places Output 1, Inverting Input 1, Non-Inverting Input 1, and GND on Pins 1ā4, while Non-Inverting Input 2, Inverting Input 2, Output 2, and VCC occupy Pins 5ā8.
Electronics repair engineers, SMPS technicians, and embedded hardware designers keep the LM358 SMD IC stocked on their benches because it serves as the go-to analog workhorse inside automatic 12V/24V battery chargers, UPS voltage-sensing boards, LED constant-current drivers, and Arduino sensor modules. With a 100dB typical open-loop DC voltage gain and short-circuit-protected outputs capable of sinking/sourcing up to 20mAā40mA, it drives optocoupler LEDs, transistor bases, and microcontroller ADC inputs reliably.
Whether you are replacing a damaged analog sensing chip on a charger PCB or designing a compact low-side current amplifier, this LM358 SMD IC delivers dependable, single-supply analog performance.
Key Features & Analog Circuit Advantages
-
True Single-Supply Operation (3V to 32V DC): Runs seamlessly from 3.3V, 5V, 12V, or 24V battery and adapter rails without needing a negative voltage generator.
-
Ground-Sensing Input Common-Mode Range: Input voltage range includes ground (
0V), allowing direct amplification of low-side current-sense resistors. -
Two Independent Compensated Op-Amps in SOIC-8: Built-in unity-gain frequency compensation saves external components and board space.
-
Ultra-Low Quiescent Supply Drain (~0.5mA): Minimal standby power consumption suits battery-powered meters, BMS boards, and solar controllers.
-
High Open-Loop Voltage Gain (100dB Typical): Provides accurate linear amplification, precision voltage comparison, and active signal filtering.
-
Short-Circuit Protected Output Stage: Built-in output current limiting protects the silicon die against accidental momentary output shorts to ground.
Technical Specifications
| Parameter | Symbol | Rating / Details |
| Product Name | ā | LM358 SMD IC |
| Amplifier Configuration | ā | Dual Independent Operational Amplifier (2 Channels) |
| Package Type | ā | SOIC-8 (8-Pin Surface-Mount SMD) |
| Single-Supply Voltage Range | $V_{CC}$ | 3.0V to 32.0V DC |
| Dual-Supply Voltage Range | $V_{S}$ | ±1.5V to ±16.0V DC |
| Input Common-Mode Voltage Range | $V_{ICM}$ | 0V (GND) to $V_{CC} – 1.5\text{V}$ |
| Quiescent Supply Current (Both Amps) | $I_{CC}$ | ~0.5mA Typical (1.2mA Max) |
| Large-Signal Open-Loop Voltage Gain | $A_{VD}$ | 100dB (100 V/mV Typical) |
| Gain-Bandwidth Product | $GBW$ | ~1.0MHz Typical |
| Input Offset Voltage | $V_{IO}$ | 2mV Typical (7mV Max at 25°C) |
| Output Short-Circuit Current | $I_{SC}$ | ~40mA Typical |
| Operating Temperature Range | $T_A$ | 0°C to +70°C (Commercial) / -40°C to +85°C (Industrial) |
Practical Circuit & Repair Applications
-
Automatic Battery Charger & Capacity Tester Repairs: Replace faulty current-sensing and cut-off comparator op-amps on battery chargers and diagnostic boards like our ZB2L3 HW-586 Battery Capacity Tester Module.
-
SMPS & Inverter Voltage / Current Feedback Loops: Pair with PWM controllers such as our TL494 SMD IC for precision low-side shunt amplification and over-temperature shutdown sensing.
-
Arduino / ESP32 Sensor Signal Conditioning: Amplify weak photodiode, strain-gauge, or NTC thermistor signals into clean 0ā3.3V/5V analog ADC readings.
-
Compact SMD PCB Rework & Prototyping: Solder cleanly onto 1.27mm-pitch SOIC-8 footprints using precision tools like our Goot 60W Soldering Iron.
Circuit Design & Soldering Precautions
Keep in mind that while the input stage of the LM358 SMD IC senses all the way down to 0V (GND), its positive input ceiling reaches $V_{CC} – 1.5\text{V}$ and its maximum output high swing reaches roughly $V_{CC} – 1.5\text{V}$āso powering the chip at 5V yields a maximum output swing of about 0V to 3.5V rather than full rail-to-rail 5V. Always solder a 100nF ceramic decoupling capacitor right across Pin 8 ($V_{CC}$) and Pin 4 (GND) to prevent oscillation, and tie any unused second op-amp channel as a unity-gain voltage follower (Out2 connected to -In2, +In2 tied to a mid-supply reference) rather than leaving inputs floating.






Reviews
There are no reviews yet.