Description
Replacing a cracked, loose, or burnt AC power cord plug with a cheap, hollow plastic connector creates dangerous arcing, overheating terminals, and frequent power dropouts across household appliances and workshop tools. The Two Pin Plug ā Superior Quality ABS Plastic Electric Plug 220Vā250V 10A Power Socket Plug available at Rafiq Electronics is a heavy-duty, screw-terminal mains connector built for safe, reliable 220Vā250V AC power delivery up to 10 Amperes (2200Wā2500W). Featuring solid high-conductivity brass pins, deep brass screw-clamp terminals, and a thick flame-retardant ABS plastic shell, this Two Pin Plug ensures tight, spark-free contact inside standard 2-pin and universal wall sockets. To understand how standardized two-pole ungrounded AC plugs transfer single-phase mains power safely across domestic and light industrial equipment, read about AC power plugs and sockets on Wikipedia.
Engineered for quick, solder-free assembly, the Two Pin Plug opens cleanly via a single center housing screw to reveal spacious internal wiring channels and an integrated cable strain-relief clamp. Tightening the rear cord grip locks your twin-core cable firmly in place so accidental tugs on the wire never pull copper strands loose from the brass terminal screws. Its contoured, easy-grip exterior body makes plugging and unplugging effortless without straining the cord jacket.
Electricians, appliance repair technicians, extension board builders, and DIY makers rely on this Two Pin Plug for durable, everyday mains cord terminations.
Whether you are repairing a damaged table fan lead, assembling a custom extension cord, or wiring benchtop electronics equipment, this Superior Quality ABS Plastic Electric Plug delivers dependable electrical safety and long service life.
Key Features & Electrical Safety Advantages
-
Solid High-Conductivity Brass Pins: Precision-machined brass prongs resist corrosion, oxidation, and bending while maintaining tight grip inside wall sockets.
-
Heavy-Duty 10A / 220Vā250V AC Rating: Safely handles continuous electrical loads up to 2200Wā2500W for fans, chargers, soldering irons, lamps, and appliances.
-
Superior Flame-Retardant ABS Body: Thick, impact-resistant ABS plastic casing withstands drops, heat buildup, and daily handling without cracking.
-
Internal Cable Strain-Relief Grip: Built-in screw-down cord clamp secures outer wire insulation tightly to prevent wire pull-out and internal short circuits.
-
Easy Screw-Terminal Wiring: Large brass terminal screws accept twisted or ferruled copper conductors cleanly without requiring a soldering iron.
-
Universal 2-Pin Socket Compatibility: Fits standard 2-pin wall outlets, extension strips, and universal multi-plug sockets smoothly.
Technical Specifications
| Parameter | Details |
| Product Name | Two Pin Plug ā Superior Quality ABS Plastic Electric Plug |
| Rated Voltage | 220V ā 250V AC, 50Hz/60Hz |
| Maximum Current Rating | 10A Max (Up to 2200W ā 2500W Load) |
| Pin Configuration | 2-Pole Ungrounded Round Brass Pins |
| Pin & Terminal Material | Solid High-Conductivity Brass with Screw Clamps |
| Housing Material | Superior Flame-Retardant, Impact-Resistant ABS Plastic |
| Strain Relief | Integrated Internal Screw-Fastened Cord Grip Clamp |
| Compatible Wire Size | Standard Twin-Core Flexible Copper Wire (Up to 1.5mm² / 23/76 ā 40/76) |
| Primary Applications | Custom Extension Cords, Appliance Cord Repair, Lamps, Fans & DIY Electronics |
Practical Electrical, Workshop & DIY Applications
-
Custom Extension Board Assembly: Terminate 23/76 or 40/76 twin-core copper wire cleanly when building custom leads alongside our AC 220V 10A Extension Board ā 3-Way Socket Power Board with 23/76 Copper Wire (5ft to 20ft) and 220V Extension Board ā Micro Lead 10A 3-Way.
-
Home Appliance & Fan Cord Repair: Replace broken or melted plugs on pedestal fans, table lamps, battery chargers, and kitchen appliances in minutes.
-
Workbench Power Tool Leads: Repair damaged AC cords on soldering tools like our Original 60W Soldering Iron Kit with Solder Paste & 0.8mm Wire.
-
Clean Wire Stripping & Testing: Strip outer and inner wire insulation neatly with our Automatic Wire Stripper Cutter Plier and check continuity with the DT830 Digital Multimeter.
Safe Wiring & Installation Guidelines
Always ensure the wire is completely disconnected from AC mains before assembling or opening the plug. Strip approximately 6mmā8mm of insulation from each copper conductor, twist the fine copper strands tightly together (avoiding stray whiskers that could bridge across pins), insert them fully into the brass terminal blocks, and tighten the screws firmly. Always clamp the outer PVC cable jacket under the internal strain-relief bar before closing the ABS cover, and never exceed the 10A (2200W) load limit.








Reviews
There are no reviews yet.