Description
Wiring multiple AC or DC power feeds, sensor leads, or load circuits onto a board or panel using twisted wire splices or weak plastic connectors leads to loose contacts, heat buildup, and messy troubleshooting. The KF-25 4-Pin Terminal Block – 300V 30A Screw Terminal Block Connector for AC & DC Circuits available at Rafiq Electronics provides a sturdy, four-way screw-clamped connection point rated up to 30A at 300V AC/DC. Featuring four individual screw terminals in a compact, insulated housing, this KF-25 4-Pin Terminal Block lets you fasten and release solid or multi-strand copper wires cleanly with a standard screwdriver while keeping four circuits organized side by side. To understand how screw-clamped terminal blocks provide reliable, serviceable wire connections in electrical and electronics setups, read about Screw terminals on Wikipedia.
Built with high-conductivity metal clamping contacts and a durable insulating plastic housing, this KF-25 4-Pin Terminal Block grips stripped copper conductors firmly without chewing through fine wire strands and allows easy rewiring during repairs or circuit modifications. Its four-position linear format keeps positive/negative or live/neutral lines neatly aligned on power supply boards, control panels, and DIY test rigs.
Electronics technicians, appliance repairers, solar/inverter builders, and DIY makers rely on this KF-25 4-Pin Terminal Block for clean, reusable multi-wire connections.
Whether you are organizing four DC power lines on a custom controller, connecting AC/DC test leads on a bench supply, or wiring a compact distribution board, this 300V 30A Screw Terminal Block Connector keeps connections neat and secure.
KF-25 4-Pin Terminal Block Key Features & Connection Advantages
-
300V 30A AC & DC Rating: Built to handle currents up to 30A across voltages up to 300V AC/DC for dependable power and control wiring.
-
4-Pin Multi-Circuit Layout: Four separate screw terminals let you wire multiple inputs, outputs, or common rails cleanly in a single compact block.
-
Firm Screw-Clamp Wire Grip: Tightens down solidly onto stripped copper wires to prevent accidental pull-outs and maintain low contact resistance.
-
Reusable & Serviceable Design: Loosen or retighten screws anytime with a screwdriver without cutting wires or desoldering permanent joints.
-
Insulated Protective Housing: Durable plastic body isolates adjacent terminals cleanly for safer panel and board routing.
-
Broad AC & DC Compatibility: Suitable for low-voltage DC battery/module wiring as well as AC mains and power supply circuits within rating limits.
Technical Specifications
| Parameter | Details |
| Product Name | KF-25 4-Pin Terminal Block – 300V 30A Screw Terminal Connector |
| Model Number | KF-25 |
| Pin Configuration | 4-Pin (4-Position Screw Terminal Block) |
| Rated Voltage | Up to 300V AC / DC |
| Rated Current | Up to 30A |
| Operating Circuit Type | AC & DC Circuits |
| Connection Method | Screw-Clamp Wire Termination |
| Primary Applications | Power Boards, Control Panels, DIY Circuits & Electrical Wiring |
Practical Power, Repair & DIY Applications
-
Power Supply & Controller Boards: Terminate multiple AC or DC input/output leads cleanly onto power cards, driver modules, and custom enclosures.
-
Bench Testing & Prototype Wiring: Connect or swap four test leads rapidly during circuit debugging without permanent solder joints.
-
Clean Wire Prep & Inspection: Strip and trim wire ends cleanly using our YTH-109 Electronics Wire Cutter Pliers, solder board pins or tin ends neatly with our Original 60W Soldering Iron Kit with Solder Paste & 0.8mm Wire and Broza Soldering Flux Paste, and check continuity/voltage with the DT830 Digital Multimeter.
-
Heavy-Duty Alternatives: For heavier 40A–50A high-current power distribution, check our KF-45 4-Pin Terminal Block or KF-65 2-Pin 50A Power Connector.
Safe Wiring & Installation Guidelines
Always switch off 220V AC mains power and disconnect DC battery or power supplies completely before stripping wires or tightening terminal screws. Strip insulation cleanly so bare copper sits squarely inside the terminal clamp with no stray strands touching neighboring screws, tighten each screw firmly without over-torquing, and keep continuous current within 30A.









Reviews
There are no reviews yet.