Description
Running a 12V DC room cooler, pedestal fan, or LED lighting setup directly on a battery until the battery goes completely flat causes deep sulfation, permanent plate damage, and even damages your battery charger when you try to recharge a dead cell. The Battery Over Discharge Protection System with Voltmeter – 12V Automatic Low Voltage Cut-Off Device engineered and assembled in-house at Rafiq Electronics automatically protects both your 12V battery and battery charger from costly deep-discharge failure. Whenever your battery voltage drops below 9V under load, this Battery Over Discharge Protection System with Voltmeter instantly disconnects the connected DC load—stopping over-discharge before permanent battery degradation occurs. To understand why deep discharging lead-acid and lithium batteries below safe cut-off thresholds shortens cycle life and causes sulfation, read about Deep-cycle battery discharge on Wikipedia.
Built inside a rugged, enclosed protective housing with heavy-duty Input 12V (+ / -) and Output 12V (+ / -) screw terminals alongside a live digital Voltmeter, this custom-built 12V Automatic Low Voltage Cut-Off Device lets you monitor exact real-time battery voltage at a glance. Available in five selectable current ratings—10A, 20A, 30A, 40A, and 50A—you can match the exact amperage capacity needed for small 12V LED backups all the way up to high-draw 12V DC air coolers, pedestal fans, and solar home systems.
Solar system users, home backup owners, DC air cooler technicians, and off-grid DIY builders rely on this Battery Over Discharge Protection System with Voltmeter to double battery lifespan and prevent charger overload.
Whether you are running a 12V DC room cooler during summer load-shedding or powering DC fans from a 75Ah–200Ah tubular or car battery, this 12V Automatic Low Voltage Cut-Off Device gives you worry-free, hands-off battery protection.
Key Features & Battery Protection Advantages
-
Automatic 9V Low-Voltage Load Cut-Off: Continuously monitors battery voltage and automatically disconnects the DC load the moment battery voltage falls below 9V, preventing deep discharge.
-
Protects Both Battery & Charger: Stops batteries from dropping into a dead-cell state that ruins battery plates and overloads smart chargers during recharge.
-
Built-In Live Digital Voltmeter: Integrated display provides continuous, real-time monitoring of your 12V battery voltage under load and standby.
-
Multiple Current Variants (10A / 20A / 30A / 40A / 50A): Selectable high-current ratings handle everything from light DC fans to heavy-duty 12V DC air coolers without overheating.
-
Clear Input & Output Screw Terminals: Separate, clearly labeled 12V Input (
+/-) and 12V Output (+/-) terminal blocks ensure fast, mistake-free wiring. -
In-House Engineered & Tested by Rafiq Electronics: Custom-built locally for Pakistani summer load-shedding conditions with durable enclosure protection.
Technical Specifications
| Parameter | Details |
| Product Name | Battery Over Discharge Protection System with Voltmeter |
| Nominal System Voltage | 12V DC Battery Systems (Lead-Acid, Tubular, AGM, Gel & LiFePO4) |
| Available Current Ratings | 10A, 20A, 30A, 40A & 50A Variants (Select Required Amperage) |
| Low-Voltage Cut-Off Threshold | Automatic Load Cut-Off Below 9V DC |
| Voltage Display | Built-In Live Digital DC Voltmeter |
| Connection Terminals | Heavy-Duty Screw Terminals (Input 12V + / - & Output 12V + / -) |
| Enclosure Design | Compact Insulated Wall/Panel-Mount Protective Box |
| Primary Applications |
12V DC Air Coolers, DC Pedestal/Ceiling Fans, Solar Backups & LED Lights |
Practical Home, Solar & DC Appliance Applications
-
12V DC Room Air Coolers & Pedestal Fans: Protect your 12V battery during overnight load-shedding when running high-draw DC coolers and fans.
-
Complete Battery Charging & Protection Setup: Recharge your protected 12V battery safely using our Eastern Star 12V 10A Smart Battery Charger or 12V 5A Smart Battery Charger.
-
Heavy-Duty Battery Terminal Wiring: Connect thick pure copper battery cables cleanly using our Copper Coated Thimble & Cable Lugs or join heavy lines with the 2 Point Wire Connector 100A 220V.
-
Voltage & Load Verification: Double-check battery resting voltage and charging levels anytime with our DT830 Digital Multimeter.
Safe Wiring & Installation Guidelines
Always verify Positive (+) and Negative (-) polarity carefully before tightening any terminal screws—reversing battery polarity will damage the control circuit. Connect your 12V Battery (+ and -) strictly to the Input 12V terminals and your DC Cooler, Fan, or Load (+ and -) to the Output 12V terminals using pure copper wire thick enough for your chosen amperage variant (10A, 20A, 30A, 40A, or 50A). Always select a current rating at least 20%–30% higher than your peak DC appliance load for cool, long-lasting operation.





Reviews
There are no reviews yet.