Description
Troubleshooting dead audio preamplifier stages, mute circuits, or optocoupler feedback loops on compact surface-mount PCBs demands a low-noise, high-gain PNP bipolar junction transistor that fits dense SMD layouts without bulky through-hole leads. The 2SA733 A733 PNP SOT-23 SMD Transistor available at Rafiq Electronics is the surface-mount SOT-23 equivalent of the classic Japanese 2SA733 general-purpose PNP silicon transistor, identifiable on circuit boards by its crisp CS top-package SMD marking code. Rated for a 50V collector-emitter breakdown voltage ($V_{CEO}$) and 150mA (0.15A) continuous collector current, this 2SA733 A733 PNP SOT-23 SMD Transistor delivers linear small-signal amplification and fast logic-level switching across SMPS power adapters, inverter control boards, LED drivers, and consumer audio equipment. To learn more about PNP bipolar junction transistor biasing and small-signal amplification characteristics, you can read about Bipolar junction transistors on Wikipedia.
Engineered with a high DC current gain ($h_{FE}$) typically spanning 120 to 700 (commonly sorted into Q, R, S, or K gain ranks) and a low saturation voltage ($V_{CE(sat)}$ max 0.3V), the 2SA733 A733 PNP SOT-23 SMD Transistor switches cleanly from 3.3V and 5V microcontroller GPIO pins with minimal base drive current. Its 180MHz transition frequency ($f_T$) and low output capacitance ($C_{ob} \approx 4.5\text{pF}$) ensure crisp, distortion-free signal fidelity in audio preamplifiers, active filters, and high-frequency pulse-shaping stages. Standard SOT-23 3-pin layout places Pin 1: Base (B) and Pin 2: Emitter (E) on the bottom two-pad edge, with Pin 3: Collector (C) centered on the opposite top edge—making board tracing and hot-air rework straightforward.
PCB repair technicians, SMPS service engineers, and embedded hardware designers keep the 2SA733 A733 PNP SOT-23 SMD Transistor stocked in their SMD component books because it serves as a direct complementary partner to the popular 2SC945 (CR marking) NPN transistor in push-pull driver stages, level shifters, and comparator hysteresis circuits. Its miniature 2.9mm x 1.3mm SOT-23 footprint saves valuable PCB real estate while supporting automated pick-and-place assembly as well as hand-soldering rework.
Whether you are repairing a damaged SMPS standby rail, rebuilding a complementary push-pull gate driver, or prototyping compact microcontroller sensor interfaces, this 2SA733 A733 PNP SOT-23 SMD Transistor provides dependable, low-noise switching and amplification.
Key Features & Semiconductor Advantages
-
Standard SOT-23 SMD Package with “CS” Marking: Compact 3-pin surface-mount footprint with clear top laser code (
CS) for rapid board identification and inventory sorting. -
50V Collector-Emitter & 150mA Current Rating: Provides ample voltage headroom for 12V, 24V, and 48V control rails, relay coils, and optocoupler interfaces.
-
High DC Current Gain ($h_{FE}$ 120–700): Requires minimal base current to saturate fully, ideal for direct microcontroller and CMOS logic interfacing.
-
Complementary Pair with 2SC945 (NPN): Matches the electrical characteristics of the 2SC945 SMD transistor for symmetrical push-pull drivers and analog amplifier stages.
-
Low Noise & 180MHz Transition Frequency: Delivers clean audio preamplification and fast switching response in high-frequency SMPS feedback circuits.
-
Low Collector-Emitter Saturation Drop ($\le 0.3\text{V}$): Minimizes power dissipation and thermal rise inside compact plastic enclosures.
Technical Specifications
| Parameter | Symbol | Rating / Details |
| Product Name | — | 2SA733 A733 PNP SOT-23 SMD Transistor |
| Transistor Polarity | — | PNP Silicon Epitaxial Planar Transistor |
| Package & Marking Code | — | SOT-23 (3-Pin SMD) / Top Marking: CS |
| Pinout Configuration | B – E – C | Pin 1: Base | Pin 2: Emitter | Pin 3: Collector |
| Collector-Base Voltage | $V_{CBO}$ | -60V Max |
| Collector-Emitter Voltage | $V_{CEO}$ | -50V Max |
| Emitter-Base Voltage | $V_{EBO}$ | -5V Max |
| Continuous Collector Current | $I_C$ | -150mA (-0.15A) Max |
| Total Power Dissipation | $P_C$ | 200mW (at $T_A = 25^\circ\text{C}$) |
| DC Current Gain | $h_{FE}$ | 120 – 700 (at $V_{CE} = -6\text{V}, I_C = -1\text{mA}$) |
| Collector-Emitter Saturation Voltage | $V_{CE(sat)}$ | -0.3V Max (at $I_C = -100\text{mA}, I_B = -10\text{mA}$) |
| Transition Frequency | $f_T$ | 180MHz Typical |
| Operating Junction Temperature | $T_J$ | -55°C to +150°C |
Practical Circuit & Repair Applications
-
MOSFET Gate Driver & Push-Pull Turn-Off Stages: Pair with a complementary NPN transistor to rapidly discharge gate capacitance when switching power devices like our IRFZ44N N-Channel MOSFET Transistor.
-
SMPS, UPS & Solar Inverter Control Board Repairs: Replace shorted
CS-marked SOT-23 PNP transistors in secondary feedback, over-voltage shutdown, and buzzer driver circuits. -
High-Side Logic Level Shifting & Indicator Switching: Control high-side LED status arrays and voltage-sense dividers on battery monitors such as our 1S-8S Battery Capacity Level Indicator.
-
Precision SMD Soldering & Rework Practice: Ideal for fine-pitch PCB assembly and repair alongside precision tools like our Goot 60W Soldering Iron.
Soldering & Circuit Design Precautions
Always include a base current-limiting resistor (typically 1kΩ to 10kΩ) in series with the Base pin of the 2SA733 A733 PNP SOT-23 SMD Transistor, as driving the emitter-base junction directly without resistance will exceed the 50mA peak base current rating and destroy the transistor. Keep continuous collector load current safely below 100mA–120mA to stay well within the 200mW thermal dissipation limit of the miniature SOT-23 package, and limit hot-air or soldering-iron contact time to under 3 seconds per pad at $\le 300^\circ\text{C}$ during PCB rework.









Reviews
There are no reviews yet.