Description
Fine-tuning voltage divider reference points, calibrating operational amplifier offset nulling, and setting precise over-current or thermal trip thresholds on compact printed circuit boards require a space-saving preset resistor that holds its calibration without drifting under mechanical vibration. At Rafiq Electronics, we supply the 3K Variable Potentiometer (302), a single-turn horizontal-mount preset trimpot resistor engineered for accurate on-board circuit calibration. Marked with the standard EIA 3-digit resistance code “302” ($30 \times 10^2\,\Omega = 3,000\,\Omega = 3\text{k}\Omega$), this horizontal PCB-mount trimmer features a top-facing cross-slot/screwdriver adjustment rotor—allowing technicians and makers to dial in exact resistance values from $0\,\Omega$ to $3\text{k}\Omega$ while keeping a ultra-low profile inside tight electronics enclosures. To learn more about trimmer potentiometer resistive elements and wiper calibration mechanics, you can read about Trimmer potentiometer design on Wikipedia.
Unlike bulky panel-mount rotary potentiometers with long metal shafts meant for frequent user knob turning, a horizontal 3K Variable Potentiometer (302) is designed specifically for “set-and-forget” PCB calibration. Its three rigid tinned-steel/copper pins insert flat onto standard 2.54mm (0.1-inch) perfboard and PCB footprints in a stable triangular tripod layout—two outer terminals spanning the fixed $3\text{k}\Omega$ resistive track and a central/front wiper pin tapping the variable voltage ratio. Because the adjustment rotor sits parallel to the board surface with its screwdriver slot facing straight upward, you can easily calibrate crowded power supply, charger, and sensor boards from above without tilting your screwdriver sideways.
Power supply repair technicians, embedded hardware developers, and DIY electronics builders rely on the 3K Variable Potentiometer (302) whenever fine resistance resolution around the $1\text{k}\Omega$–$3\text{k}\Omega$ range is needed (where a standard $10\text{k}\Omega$ or $100\text{k}\Omega$ trimpot would be overly touchy and hard to adjust smoothly). Whether you are trimming output voltage feedback dividers in adjustable DC-DC converters, calibrating LCD contrast levels, setting comparator hysteresis thresholds, or fine-tuning transistor bias currents, this linear-taper $3\text{k}\Omega$ preset trimmer delivers smooth, repeatable wiper contact.
Keeping the 3K Variable Potentiometer (302) stocked in your component organizer ensures you always have an accurate, low-profile $3\text{k}\Omega$ preset trimmer ready for board-level calibration, charger repairs, and microcontroller sensor tuning.
🌟 Key Highlights
-
🎯 Precise 3K Ohm (Code 302) Resistance Range: Offers finer, smoother calibration resolution around low-impedance feedback and reference dividers than coarse 10K/50K trimpots.
-
📐 Low-Profile Horizontal PCB Mount: Lies flat against the circuit board with a top-facing adjustment slot for effortless vertical screwdriver calibration inside tight cases.
-
🔧 Top Cross-Slot Screwdriver Rotor: Accepts standard flathead or Phillips precision screwdrivers for quick, slip-free resistance tuning.
-
🔌 Breadboard & 2.54mm Perfboard Friendly: Rigid 3-pin tripod footprint inserts cleanly into standard 0.1-inch prototype boards and custom PCBs.
-
📈 Linear Taper (B-Type) Response: Provides uniform resistance change per degree of rotation for predictable voltage divider and current-limit adjustments.
-
🛠️ Essential Calibration & Repair Staple: Ideal for SMPS voltage trimming, TL431 reference feedback networks, sensor sensitivity tuning, and audio bias calibration.
📋 Technical Specifications
| Specification | Details |
| Product Name | 3K Variable Potentiometer (302) |
| Component Type | Single-Turn Horizontal Preset Trimpot / Variable Resistor |
| Resistance Value & Marking Code | 3K Ohm (3,000Ω) — EIA Code 302 |
| Resistance Tolerance | ±20% |
| Taper Characteristic | Linear (B-Taper) |
| Rated Power Dissipation | ~0.1W to 0.2W (100mW–200mW) |
| Max Operating Voltage | 50V DC |
| Mounting Orientation | Horizontal Through-Hole (Top-Adjust Rotor) |
| Pin Configuration | 3-Pin Tripod Layout (2 Fixed Track Ends + 1 Variable Wiper) |
| Operating Temperature Range | -25°C to +70°C (or +85°C) |
🔌 Applications
-
Precision Voltage Reference & Power Supply Trimming: Fine-tune the output voltage divider network of adjustable shunt regulators like our TL431 Adjustable Precision Shunt Regulator or SMPS feedback stages built with our VIPer12A IC.
-
Transistor Bias & Audio Quiescent Current Calibration: Dial in exact base-bias voltage dividers for low-distortion amplifier stages using transistors such as our BD139 Transistor and BD140 Transistor.
-
Arduino & Microcontroller Sensor Threshold Tuning: Adjust analog reference voltages for LDR light sensors, thermistor temperature triggers, and comparator modules.
-
Battery Charger & BMS Cutoff Calibration: Fine-tune float-charge voltage and over-current trip points in custom lead-acid and lithium charger boards.
💡 Best Installation & Safety Tips
Use a lightweight plastic trimming tool or small precision screwdriver with gentle downward pressure when adjusting the 3K Variable Potentiometer (302)—forcing the rotor past its mechanical end-stops can strip the plastic wiper carrier or crack the carbon resistive track. Never wire a 3K trimpot directly across a stiff power supply rail when the wiper is near $0\,\Omega$ without a fixed series safety resistor, as excessive current through a narrow segment of the resistive track will immediately burn out the carbon film.









Reviews
There are no reviews yet.