Welcome to Rafiq Electronics
Free shipping on Order Over Rs. 3000
15 DAYS RETURN & EXCHANGE POLICY
GET 4% DISCOUNT ON ADVANCE PAYMENT
Previous
Previous Product Image

12V Battery to USB Mobile Charger – 33W Fast Charging DC Converter | Universal USB Port for Type-C or Micro USB Cable | High Quality 12V to 5V 3A Charger for All Smartphones

Rs. 499
Next

Make Custom Electronics Project – Design Your Own Circuit or Device | Contact on WhatsApp 03002717308 for Custom Project Development

Rs. 1
Next Product Image

Automatic Changeover Switch 7500W 220V – Auto Power Transfer & Generator Auto-Off System for WAPDA / K-Electric

Rs. 2999

Automate your backup power and save generator fuel with the Automatic Changeover Switch 7500W 220V from Rafiq Electronics. Designed for WAPDA/K-Electric and generator systems, it automatically shifts your load to generator power during outages, transfers back when grid power returns, and shuts off your generator automatically.

Buy Now
Trust Badge Image

Description

Running outside to your distribution board every time load-shedding hits—flipping heavy manual changeover levers in the dark and forgetting to shut down your running generator after grid electricity returns—wastes expensive petrol or gas and risks dangerous phase collisions. The Automatic Changeover Switch 7500W 220V – Auto Power Transfer & Generator Auto-Off System for WAPDA / K-Electric available at Rafiq Electronics is a smart, high-capacity 7500W (approx. 34A at 220V AC) power transfer controller engineered specifically for Pakistani homes, shops, and offices. Simply start your generator when WAPDA or K-Electric power goes out—this Automatic Changeover Switch 7500W 220V automatically transfers your connected load onto the generator line, and the moment utility mains return, it seamlessly shifts your home load back to WAPDA/KE while sending an automatic ignition kill/stop signal to shut down your generator. To understand how automatic transfer switches isolate grid and backup power sources safely without back-feeding utility lines, read about Transfer switches on Wikipedia.

Built with heavy-duty internal high-current power relays, copper bus connections, and intelligent mains-sensing circuitry, this Automatic Changeover Switch 7500W 220V handles whole-home lighting, fans, refrigerators, LED TVs, computers, and water pumps up to 7500W total load. Its built-in electrical interlocking prevents WAPDA/KE and Generator outputs from ever connecting simultaneously, eliminating back-feed hazards to utility linemen and protecting your generator alternator from burnout.

Homeowners, retail shopkeepers, clinic operators, and electrical contractors rely on this Automatic Changeover Switch 7500W 220V for effortless, hands-off backup power management.

Whether you are upgrading an outdated manual knife changeover switch or setting up a new generator backup panel, this Auto Power Transfer & Generator Auto-Off System saves fuel, time, and effort every single day.

Key Features & Smart Power Transfer Advantages

  • Heavy-Duty 7500W (220V AC) Load Capacity: Handles up to 7500W (~34A) continuous household or commercial load, easily running fans, lights, fridges, routers, and appliances together.

  • Automatic WAPDA/KE & Generator Load Shifting: Transfers connected home load to the generator automatically when mains fail, and shifts back to WAPDA / K-Electric automatically as soon as grid voltage stabilizes.

  • Smart Automatic Generator Off Function: Eliminates wasted fuel and noise by automatically shutting off your generator engine once WAPDA/KE mains power is restored—you only have to start the generator.

  • Zero Back-Feed Electrical Interlocking: Isolates grid and generator inputs completely so two power sources can never collide or back-feed into street lines.

  • Mains Restoration Stabilization Delay: Brief built-in sensing delay lets incoming WAPDA/KE voltage settle before transferring load and stopping the generator, protecting sensitive electronics from initial surge spikes.

  • Clear Terminal Layout for Easy DB Installation: Dedicated, clearly labeled input, output, and generator kill-wire terminals make installation straightforward for any electrician.

Technical Specifications

Parameter Details
Product Name Automatic Changeover Switch 7500W 220V – Auto Power Transfer System
Maximum Load Capacity 7500W (7.5 kW / Approx. 34A at 220V AC)
Rated Operating Voltage 220V – 240V AC, 50Hz Single-Phase
Supported Power Sources Grid Mains (WAPDA / K-Electric) + Backup Petrol/Gas Generator
Transfer & Stop Operation Automatic Load Transfer + Automatic Generator Shut-Off on Mains Return
Isolation & Safety Built-In Relay Interlocking (Prevents Mains & Generator Collision)
Mounting Style Wall / Distribution Board (DB) Enclosure Mount
Primary Applications Homes, Shops, Offices, Clinics & Generator Backup Panels

Practical Home, Shop & Backup Power Applications

  1. Whole-Home Load-Shedding Automation: Automate your main distribution board so family members never have to operate manual changeover handles at night or in rainy weather.

  2. Retail Shops, Offices & Clinics: Keep lights, fans, POS systems, and cameras running smoothly on generator backup and automatically cut generator fuel waste the second WAPDA/KE returns.

  3. Live Mains & Generator Voltage Monitoring: Pair on your distribution panel with our AC 220V Analog Voltmeter to view real-time 220V output at a glance.

  4. Heavy-Duty Cable Termination & Testing: Crimp thick main copper cables securely using our Copper Coated Thimble & Cable Lugs or Copper Tube Terminals, and verify phase/neutral wiring safely with the DT830 Digital Multimeter.

Safe Wiring & Generator Stop-Wire Guidelines

Always isolate both WAPDA/KE main breakers and shut off your generator completely before wiring the changeover switch. Connect the WAPDA/KE Live (L) & Neutral (N), Generator Output (L & N), and Home Load (L & N) strictly to their matching marked terminals using heavy-gauge pure copper cable (4mm² / 7/0.036 or thicker) rated for 7500W / 35A. Connect the Generator Auto-Off control wires across your generator’s ignition stop/kill switch terminals (never feed 220V AC directly into the generator ignition stop wire unless specified by your generator wiring diagram), and keep total connected appliance load within 7500W.

Reviews

There are no reviews yet.

Be the first to review “Automatic Changeover Switch 7500W 220V – Auto Power Transfer & Generator Auto-Off System for WAPDA / K-Electric”

Your email address will not be published. Required fields are marked *

Recently Viewed Products

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping